PE Jaw Crusher - HUAYUE BRILLIANT - Huayue Brilliant - China Crusher supplier

PE Jaw Crusher

Overview

PE series jaw crusher is developed and applied widely in mines, quarries, road construction, building material, highway, railway, water conservancy and other industrial. The product specification is complete, the feed size from 150-1500 mm, PE/PEX-type jaw crusher crushing materials of compressive strength of up to 300Mpa, it is a complete set of broken lines in the first choice of primary crushing equipment.
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw, and the stuff will be crushed in multiple ways. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of jaw crusher moves away from fixed jaw by the pulling force of rod and spring, the products after crushing will be discharged from the outlet of Jaw crusher.

Features

High ratio of crushing;
Homogeneous final grain size
Simple structure
Reliable working condition
Easy maintenance
Low operating cost

Technical Data

Model	Feed opening	Max.Feed size	Discharge opening range	Capacity	Power	Weight
Model	(MM)	(MM)	(MM)	(T/H)	(KW)	(T)
PE-400x600	400x600	340	40-100	16-64	30	6.5
PE-500x750	500x750	425	50-100	45-100	55	10.3
PE-600x900	600x900	500	65-160	48-120	55/75	15.5
PE-750x1060	750x1060	630	80-140	51-208	110	28
PE-900x1200	900x1200	750	100-200	144-304	132	50
PE-1000x1200	1000x1200	850	195-265	315-342	132	51
PE-1200x1500	1200x1500	1000	150-350	300-800	220	83
PE-1500x1800	1500x1800	1200	220-350	450-1000	355	122
PEX-150x750	150x750	120	18-48	8-25	15	3.5
PEX-250x750	250x750	210	25-60	12-35	22	4.9
PEX-250x1000	250x100	210	25-60	16-52	30/37	6.5
PEX-250x1200	250x1200	210	25-60	20-60	37	7.7
PEX-300x1300	300x1300	250	20-90	16-104	75	11

Application

1. Small stone powder jaw crusher is widely applied to crush high hardness, mid hardness and soft rocks and ores such as ore,quartz, granite,limestone,slags, construction materials, marble, etc...
2.The maximum compression strength of materials to be crushed is 320MPA.
3.PE series is used for primary crushing, and PEX series is used for secondary crushing and fine crushing.