简体中文
ENGLISH
HOME
Symons Cone Crusher
Overview
Working Principle
1. When the Mine barite Symons cone crusher is working, the engine rotates around a fixed point driven by the belt wheel or the coupling.
2. The transmission shaft and the conical part of cone crusher swing under the force from the eccentric bushing, which makes the crushing wall of the Symons cone crusher close to the pierced mortar wall at intervals.
3. Then, the ores will be impacted, squeezed and bent constantly in the crushing chamber.
4. At last, the whole ore crushing process is finished.
5. The perfect combination of high-performance crushing chamber and high crushing frequency improves the handling ability of cone crusher to a greater degree.
1. When the Mine barite Symons cone crusher is working, the engine rotates around a fixed point driven by the belt wheel or the coupling.
2. The transmission shaft and the conical part of cone crusher swing under the force from the eccentric bushing, which makes the crushing wall of the Symons cone crusher close to the pierced mortar wall at intervals.
3. Then, the ores will be impacted, squeezed and bent constantly in the crushing chamber.
4. At last, the whole ore crushing process is finished.
5. The perfect combination of high-performance crushing chamber and high crushing frequency improves the handling ability of cone crusher to a greater degree.
Features
- Unequaled output and uniform product throughout a wide range of capacities;
- High working efficiency,Greater crushing force;
- Largest head displacement provides greater production capacity;
- Long lasting bearing with stand crushing loads and severe environmental conditions;
- Hydraulic controls providing fast setting changes and simply clearing;
- Long life and low operating and maintenance costs.
- All parts can be exchanged with Nordberg Symons cone crusher.
Technical Data
| STANDARD SYMONS CONE CRUSHERS | ||||||||||||||
| Open circuit-capacities in tons per hour passing through the crusher at indicated discharge setting "A" | ||||||||||||||
| SIZE | type of cavity | recommended minimum discharge' setting A(mm) | feed opening with min recommended discharge setting A | capacitise in tons per hour ateach discharge setting size(mm) | ||||||||||
| B closed side | B open side | 9 | 13 | 16 | 19 | 22 | 25 | 31 | 38 | 51 | 64 | |||
|
3FT (900mm) |
fine | 9mm | 83mm | 102mm | 45 | 59 | 72 | 81 | 91 |
|
|
|
|
|
| coarse | 13mm | 159mm | 175mm |
|
59 | 72 | 91 | 109 | 118 | 136 | 163 |
|
|
|
| extra coarse | 25mm | 163mm | 178mm |
|
|
|
|
|
128 | 147 | 175 | 196 |
|
|
| 4FT (1200mm) | fine | 9mm | 127mm | 131mm | 63 | 90 | 108 | 126 | 140 | 153 | 167 |
|
|
|
| medium | 13mm | 156mm | 156mm |
|
99 | 117 | 135 | 144 | 162 | 180 | 198 |
|
|
|
| coarse | 19mm | 178mm | 191mm |
|
|
|
140 | 153 | 180 | 198 | 243 | 306 |
|
|
| extra coarse | 25mm | 231mm | 250mm |
|
|
|
|
|
189 | 207 | 252 | 315 |
|
|
| 4-1/4FT (1275mm) | fine | 13mm | 109mm | 137mm |
|
109 | 127 | 145 | 154 | 163 | 181 |
|
|
|
| medium | 16mm | 188mm | 210mm |
|
|
132 | 159 | 172 | 200 | 227 | 253 |
|
|
|
| coarse | 19mm | 216mm | 241mm |
|
|
|
172 | 195 | 218 | 249 | 295 | 378 |
|
|
| extra coarse | 25mm | 238mm | 259mm |
|
|
|
|
|
236 | 276 | 324 | 398 | 455 | |
| 5-1/2FT (1275mm) | fine | 16mm | 188mm | 209mm |
|
|
181 | 204 | 227 | 258 | 295 | 327 |
|
|
| medium | 22mm | 213mm | 241mm |
|
|
|
|
258 | 290 | 336 | 381 | 437 | 437 | |
| coarse | 25mm | 241mm | 269mm |
|
|
|
|
|
354 | 417 | 454 | 610 | 610 | |
| extra coarse | 38mm | 331mm | 368mm |
|
|
|
|
|
|
|
538 | 630 | 743 | |
| 7FT (2100mm) | coarse | 31mm | 334mm | 369mm |
|
|
|
|
|
|
|
844 | 1088 | 1257 |
| extra coarse | 38mm | 425mm | 460mm |
|
|
|
|
|
|
|
880 | 1179 | 1361 | |
Application
Symons cone crusher are widely applied in metallurgy, construction, road building, chemical and phosphatic industry. It is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz, granite, grit stone, etc... Cavity type of the crushing is decided by the application of the ores. Standard type is applicable to medium crushing, middle type is applicable to fine crushing and short-head type is applicable to super fine crushing.